Proceq Equotip 550 UCI MOTO-03 & MOTO-08 Hardness Tester

Deskripsi

Proceq Equotip 550 UCI MOTO-03 & MOTO-08 – Micro Hardness Tester

Proceq Equotip 550 UCI MOTO-03 & MOTO-08 adalah sistem Ultrasonic Contact Impedance (UCI) Hardness Testing profesional untuk pengujian micro-hardness dengan presisi tinggi. Sistem ini menggunakan gaya indentasi rendah sehingga ideal untuk menguji permukaan halus, coating tipis, heat treatment, case hardening, serta komponen dengan area pengujian terbatas.

Dilengkapi motorized probe, layar sentuh 7”, memori besar, casing rugged IP54, serta software analisa dan mapping lengkap, Equotip 550 cocok digunakan untuk kebutuhan laboratorium, quality control, inspeksi material, dan pengujian industri.

Keunggulan Proceq Equotip 550 UCI

✔ Teknologi Ultrasonic Contact Impedance (UCI) Proceq Swiss
✔ Presisi tinggi untuk Micro-Hardness Testing
✔ Indentasi sangat kecil untuk permukaan halus dan coating tipis
✔ Cocok untuk heat treatment & case hardening
✔ Motorized Probe MOTO-03 & MOTO-08
✔ Mendukung pengujian material dengan area terbatas
✔ Mendukung metode UCI, Leeb & Portable Rockwell (PRT)
✔ Layar 7” Color Capacitive Touchscreen
✔ Gorilla® Glass dan casing rugged IP54
✔ Memori hingga >1.000.000 pengukuran
✔ HAZ Mapping untuk analisa Heat-Affected Zone
✔ Custom Conversion Curve dan Measurement Mapping
✔ Built-in PDF Creator dan export data

Spesifikasi Equotip 550

✔ Display: 7” Color Capacitive Touchscreen
✔ Protection: IP54 Rugged Casing + Gorilla® Glass
✔ Memory: 8 GB Flash / >1.000.000 pengukuran
✔ Battery: 3.6V Li-Ion 14.000 mAh
✔ Battery Life: >10 jam
✔ Charging Time: <9 jam / Quick Charger <5.5 jam
✔ Connectivity: Ethernet, USB-B, USB-A, Probe Slot
✔ Dimension: 250 × 162 × 62 mm
✔ Weight: ±1.525 g termasuk baterai
✔ Operating Temperature: -10°C hingga +50°C
✔ Humidity: <95% RH, non-condensing
✔ Certification: CE, KC, FCC

Probe MOTO-03 & MOTO-08

✔ Probe Type: Motorized UCI Probe
✔ Test Method: Ultrasonic Contact Impedance (UCI)
✔ Application: Precision Micro-Hardness Testing
✔ Cocok untuk permukaan halus, coating, heat-treated surface, dan komponen presisi
✔ MOTO-03: untuk aplikasi pengujian dengan gaya/profil probe yang sesuai kebutuhan micro-hardness
✔ MOTO-08: motorized probe untuk aplikasi pengujian pada area dan komponen yang lebih besar

Software Equotip 550

✔ Heat-Affected Zone (HAZ) Mapping Tool
✔ Customizable Report & Measurement View
✔ Verification Wizard
✔ Measurement Wizard
✔ Mapping Wizard
✔ Remote Control untuk sistem otomatis
✔ Custom Conversion Curve: 1-Point, 2-Point & Polynomial
✔ Built-in PDF Creator
✔ Data Export CSV & PNG melalui Equotip Link

Material Conversion Support

✔ Steel & Cast Steel
✔ Aluminium
✔ Titanium Ti 6Al 4V
✔ Cast Iron
✔ Incoloy 825 / 2.4858
✔ 304L / 1.4307
✔ Alloy 75 / 2.4630
✔ P/T91

Aplikasi

Proceq Equotip 550 UCI MOTO-03 & MOTO-08 ideal digunakan untuk micro-hardness testing, UCI hardness testing, coating hardness, heat treatment inspection, case hardening, HAZ mapping, pengujian komponen presisi, quality control material, laboratorium metalurgi, dan inspeksi industri.